EV Charger CE Marking Guide: Which EU Directives Apply to Portable Charging Equipment in 2026

If you import EV charging equipment into the European market, you already know CE marking is mandatory. But here is what catches many B2B buyers off guard: the CE mark on an EV charger is not the result of a single test. It requires compliance with multiple overlapping EU directives, each covering a different risk domain.

Get any one of them wrong, and your shipment can be held at customs, your buyer can face recall obligations, or you can lose a distribution contract. This guide breaks down exactly which directives apply to portable EV chargers — charging guns, Mode 2 charging cables, discharge guns, and dual-head units — and what documentation you should request from your manufacturer before placing a bulk order.

Europe Market Briefing

The European EV supply equipment market continues its rapid expansion. According to a July 2026 industry report, the global EVSE market is projected to reach $110.47 billion by 2033 at a CAGR of 23.6%, with Europe remaining the second-largest regional market after Asia-Pacific. Meanwhile, the EU’s AFIR regulation has set binding targets for charging point deployment across all member states, driving accelerated procurement of certified charging infrastructure.

1. Low Voltage Directive (LVD) — 2014/35/EU

The Low Voltage Directive is the foundation of electrical safety for any EV charger operating between 50V and 1,000V AC (or 75V–1,500V DC). For portable charging equipment, this means compliance with IEC 62752 (In-Cable Control and Protection Device for Mode 2 Charging) and the EN 61851 series.

Key safety requirements under LVD include:

Protection against electric shock: Residual Current Device (RCD) with rated residual operating current ≤ 30 mA, minimum Type A (Type B recommended for three-phase installations)
Temperature monitoring: The 2024 revision of IEC 62752 now mandates a temperature detection device in the household plug — a direct response to field reports of overheating connectors causing fires
Overcurrent protection: Automatic cutoff when charging current exceeds safe limits
Dielectric strength and insulation resistance: Verified through type testing per IEC 62752 Clause 8.6

For B2B buyers, the key question is: does your supplier have type test reports from an accredited laboratory (e.g., TÜV, SGS, Intertek) covering the specific product model and its full component list?

2. EMC Directive — 2014/30/EU

The Electromagnetic Compatibility Directive ensures your EV charger neither emits excessive electromagnetic interference nor is unduly affected by external electromagnetic disturbances. This is especially critical for portable chargers used in diverse environments — residential garages, industrial parking lots, and public charging points.

The applicable harmonized standards include:

EN 61851-21-2: EMC requirements for off-board EV charging systems (conducted and radiated emissions, immunity to electrostatic discharge, surge, and power frequency magnetic fields)
EN 61000-6-1/6-2: Generic EMC standards for residential and industrial environments

The 2024 revision of IEC 62752 harmonized its EMC requirements with IEC 61543 and IEC 61851-21-2, tightening limits on conducted emissions. Manufacturers must demonstrate that the charging control box does not introduce harmonic distortion into the building’s electrical system.

3. Radio Equipment Directive (RED) — 2014/53/EU

Here is where many importers trip up. If your portable EV charger includes any wireless communication module — Wi-Fi, Bluetooth, cellular (4G/5G), NFC, or RFID — the Radio Equipment Directive applies instead of (not in addition to) the LVD and EMC Directive for the radio portion.

Under RED, the charger must comply with:

Article 3.1(a): Health and safety requirements (covering LVD aspects)
Article 3.1(b): EMC requirements
Article 3.3: Efficient use of radio spectrum
Article 3.3(d)–(f): Cybersecurity requirements (increasingly enforced)

According to the official EU CE marking guidance, when a product falls under multiple directives, full compliance with all applicable requirements is mandatory before the CE mark can be affixed. For a Wi-Fi-enabled portable charger, this means you need test reports covering both the charging function (IEC 62752) and the radio module (EN 300 328 for 2.4 GHz, EN 301 908 for cellular).

4. RoHS Directive — 2011/65/EU

The Restriction of Hazardous Substances Directive limits the use of lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, and four phthalates (DEHP, BBP, DBP, DIBP) in all electrical and electronic equipment sold in the EU.

For portable EV charging equipment, RoHS compliance affects:

Cable insulation materials (PVC vs. TPU alternatives)
Connector housing plastics
PCB solder in the control box
Coating and surface treatments on metal components

RoHS is a condition of CE marking — a product that fails RoHS cannot legally bear the CE mark. Buyers should request a current RoHS Declaration of Conformity along with third-party test reports (IEC 62321 series) for each product SKU.

5. What About UKCA for the UK Market?

Post-Brexit, Great Britain (England, Scotland, Wales) requires UKCA marking under separate legislation. While the technical standards largely mirror the EU directives, UKCA requires a separate conformity assessment process and a UK Responsible Person.

If you sell into both the EU and UK markets, your manufacturer should hold dual certification files. Some notified bodies now offer combined CE + UKCA assessment packages, which can reduce time and cost.

A Checklist for B2B Buyers: What to Request From Your EV Charger Manufacturer

Before placing a bulk order for portable EV charging equipment destined for Europe, request the following from your supplier:

EU Declaration of Conformity (DoC) — covering all applicable directives (LVD, EMC, RED if applicable, RoHS)
Type test reports from an ISO/IEC 17025 accredited laboratory
Technical file summary including bill of materials, circuit diagrams, and critical component certificates
RoHS test reports (IEC 62321) for each SKU
Factory audit report (ISO 9001 or IATF 16949 for automotive-grade quality management)
Product labeling verification — CE mark dimensions, WEEE symbol, rated values, manufacturer details

A reputable manufacturer will have all of this documentation ready. If they hesitate or ask you to “trust” the CE mark without paperwork, that is your red flag. For more on evaluating manufacturer credibility, read our guide on OEM/ODM services.

How ChuangRui Supports Compliance

At ChuangRui, every product in our range — portable charging guns, V2L discharge guns, and dual-head charging units — ships with a complete compliance package:

CE, UKCA, and UL certification files for each product line
Third-party test reports from TÜV and SGS accredited laboratories
Full RoHS and REACH compliance documentation
IATF 16949 certified production line (automotive-grade quality management)
ISO 9001, ISO 14001, and ISO 45001 management system certifications

We maintain these files as living documents — updated whenever standards are revised (such as the 2024 update to IEC 62752). Our certifications page provides a summary of our current compliance status.

Ready to Source Certified EV Charging Equipment?

Whether you are a European distributor looking for fully certified portable chargers, a fleet operator upgrading your EV infrastructure, or a retail chain adding EV accessories to your catalog, having the right compliance documentation from day one protects your business and your customers.

Explore our full product range or learn more about ChuangRui and our manufacturing capabilities.

Chat on WhatsApp — +86 13757774567
Quick questions? Our team replies within 2 hours.
Start a conversation →

Request our certification package
Need to verify CE, UKCA, UL, or RoHS documentation for your market?
Contact us →

Request a quote — 24h response
Tell us your product specifications, target quantity, and destination market.
Get a quote →

#EVCharger #CEMarking #EVCertification #OEM #B2B #PortableCharger #Compliance #EVSE